Online Sales: 480-990-7715
Scottsdale Store: 480-990-7690

Jiffy Jump Ringer

For Jewelers, Silversmiths and Crafters. The JIFFY JUMP RINGER can make jump rings fast and easy. It can take less than a minute to make as many as 10 to 15 rings

We believe it will find an important place on every work bench, regardless of the size of the jump rings needed.

The JIFFY JUMP RINGER can also be used to get a square cut on watch bands, wire, tubing, ect

Made in the USA from stainless steel and silicone bronze


the JUMP RINGER is supplied with three round rods: 1/8”, 1/16”, 3/32” and two rectangular rods for oval jump rings. The rectangular rods are shorter for easier removal of the coils.

1. Select the hole that best fits the size wire being used. Wrap the wire around the rod as pictured making a coil. (1)

2.  Release one end of the saw blade from a Jewelers saw frame and pass the saw blade through the center of the coil. Secure the saw blade in the frame

3.  Swing the jump ring cutting end of the jig around the cut of the coil as illustrated (2).

For most jump rings use a 4/0 saw blade


To make jump rings faster, make up a number of coils first and then place all the coils on the saw blades to be cut at one time.

To remove an oval coil, slightly flatten the sides of the coil with chain nosed pliers.